If you’re already familiar with the ProofVision TBCharge, you’re in the right place.
This guide is written for people who have seen the product, maybe through ads, social media, or retailer sites and want clear, easy-to-understand answers before taking the next step.
Rather than overwhelming you, we’ve broken everything down into quick summaries first, followed by clear explanations only where needed.
Quick Overview
Here’s what you need to know about the ProofVision TBCharge at a glance:
- The Proofvision TBCharge is a built-in, in-wall toothbrush charger
- It keeps your toothbrush powered safely at all times
- Compatible with most Oral-B toothbrushes
- Installed by a qualified electrician (not plug-in)
- Best planned during a bathroom renovation or as a shaver socket replacement
If that answers your main questions, feel free to scroll down to the end to find a retailer.
Q:What is the proofvision tbcharge?
The ProofVision TBCharge is an in-wall electric toothbrush charger that removes the need for countertop chargers and messy cables.
It’s built into the wall and discreetly powers your toothbrush exactly where you use it, making it a popular upgrade for modern bathrooms, renovations, and premium installs.
People often find us by searching:
- ProofVision TBCharge
- Toothbrush chargers
- In-wall toothbrush charger
- ProofVision
Q: Is It Safe to Leave My Toothbrush on the TBCharge?
Yes, it is completely safe.
The TBCharge uses a low-power inductive charging system. Once the battery reaches its maximum capacity, the toothbrush automatically regulates the energy intake. It will not overcharge, overheat, or damage the internal circuitry.
Battery Types (Easy Version)
- Oral-B Vitality (Ni-MH batteries): Safe to leave on charge at all times. To maximise battery lifespan, Oral-B recommends fully depleting the battery (brushing until it stops) once every 6 months.
- Higher-end Oral-B models (Li-ion): These models have built-in safety features. They feature sophisticated “cut-off” protection that stops the charging process entirely once 100% is reached, then they enter a maintenance mode to top off the natural discharge.
In short: Leaving your toothbrush on the charger is exactly how the system was engineered to function. You can enjoy a full power clean every time without worrying about battery degradation.
Q: Which Toothbrushes Are Compatible?
The ProofVision TBCharge works with all Oral-B toothbrushes that use the Oral-B Type 3757 charger
Some Oral-B models use a different charging system and are not compatible with the TBCharge:
- Oral-B iO7 to iO10 series that uses a magnetic charging base are not compatible with TBCharge
- All other brands, like Philips Sonicare toothbrushes, are not compatible with TBCharge
For the full compatibility list, visit: https://proofvision.co.uk/toothbrush-chargers-compatibility/
Q: How is the Proofvision TBcharge installed?
The TBCharge is a hard-wired bathroom fixture, not a plug-in device.
It comes with an isolating transformer, similar to a shaver socket, and must be installed by a qualified electrician.
Key Points
- Must be embedded into the wall using a double-gang 47 mm deep knockout box
- Cannot be plugged into a shaver socket
- Cannot be surface-mounted
For written detailed wiring guidance, see below:
https://proofvision.zohodesk.eu/portal/en/kb/articles/wiring-the-tbcharge
For video installation, see below:
Q: Do I Need an Existing Shaver Socket?
No, but having one makes installation easier.
If you already have a Shaver Socket:
- The TBCharge can often replace it, provided you already have a standard dual-gang 47mm deep back box
- Minimal disruption
- Ideal for upgrades
If You Don’t Have a Shaver Socket
- Best time to install the TBCharge is during a renovation
- Wiring will need to be installed during the renovation
- A 47mm deep dual gang back box will need to be embedded into the wall
Q: Planning a Bathroom Renovation?
For the best results, the ProofVision TBCharge should be planned during the first fix stage.
Planning the TBCharge during the first fix ensures:
- Wiring is correctly positioned for a clean, embedded installation.
- The charger can be installed without disturbing tiles or finished surfaces.
- Fewer complications and a smoother installation process.
Common Questions (Quick Answers)
No. It must be embedded into the wall for a flush finish.
No. The TBCharge is hard-wired and does not plug in.
Ready to Upgrade Your Bathroom?
If you’re looking for a cleaner, more premium way to charge your electric toothbrush, the ProofVision TBCharge is designed to be a long-term, built-in solution.
Whether you’re renovating, upgrading an existing shaver socket, or specifying products for a project, the TBCharge offers a simple improvement that makes a visible difference.
Search here for a ProofVision TBCharge retailer near you.
